Urethane
Systems
  Convenience
Foam Systems
SYSTEMS
STRAW FOAM
Quick Cure Polyurethane Foam Sealant
A fast and easy, high-yield means to seal cracks and gaps. Patented all-direction dispensing easily manoeuvres tight spots. Reusable dispensing means you can restart the can later.
All Direction Dispensing™, use at any angle
24 oz. can sizes (12 pack)
Reuseable straw dispensing system
Straw and adapter included. No gun needed.
Yields 1800 linear feet of ¼” diameter bead (24 oz. can, ASTM C-1536)
Tack-free in 30 minutes, fully cured in 4 hours (40% R.H.)
UL Classified, flame spread 10, smoke developed 15
No CFCs, no HCFCs
Straw Foam Use Guidelines
ALWAYS review and follow the directions provided in your foam kit. The below instructions are a general overview, meant to accompany the reference photos. ENSURE you follow all safety precautions including wearing protective eyewear and gloves.
Ensure surface accepting foam is clean and dry.
Attach straw to trigger adaptor.
Screw adaptor onto can valve.
Shake vigorously for 30 seconds.
Press trigger to test foam on scrap material first.
Fill gaps and cracks as needed, filling about 1/3 full to allow for foam expansion.
Foam can be trimmed, painted, sanded or plastered after curing completely.
Bend straw backwards, away from trigger and push end of
straw onto top of trigger adaptor.
Store as needed (up to 15 days).
Restart by pulling straw tip off top of adaptor. Test on scrap material first.
Storage
Instructions
New Zealand Urethane Systems Limited all rights reserved
Contact NZUS for more information about our convenience products
NEW ZEALAND URETHANE SYSTEMS LTD